Complete Wireless Communications Subsystem
The SDC-MSD30AG module is a dual-band solution - supporting IEEE 802.11a, 802.11b, and 802.11g - with Summit brand hardware and software capabilities. Because it has the same interface, form factor, board connector, and pin definitions as the SDC-MSD10G module, the SDC-MSD30AG module provides a smooth upgrade path from 802.11b/g to 802.11a/b/g, enabling use of the 5 GHz band without any extra cost.
Download
SDC-MSD30AG Hardware Integration Guide
| System Interface | 1-bit or 4-bit Secure Digital I/O |
|---|---|
| Physical Interface | Molex 54722-0607 60-pin connector (mates to Molex 555-60-0607 60-pin connector) |
| Antenna Interface | 2 U.FL (Hirose) connectors for dual-band antenna diversity |
| Chipset | Atheros AR6002 |
| Input Power Requirements | 3.3 VDC +/- 10% |
| Typical Power Consumption (at maximum transmit power setting) |
|
| Operating Temperature | -25° to 75°C (-13° to 167°F) |
| Operating Humidity | 10 to 90% (non-condensing) |
| Length | 32 mm (1.26") |
| Width | 22 mm (0.87") |
| Thickness | 4.5 mm (0.18") |
| Weight | 3.0g (0.11 oz) |
| Mounting |
|
| Wireless Media |
|
| Media Access Protocol | Carrier sense multiple access with collision avoidance (CSMA/CA) |
| Network Architecture Types | Infrastructure and Ad Hoc |
| Network Standards | IEEE 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i |
| Data Rates Supported |
|
| Modulation |
|
| Regulatory Domain Support |
|
| 2.4 GHz Frequency Bands |
|
| 5 GHz Frequency Bands |
|
| 2.4 GHz Operating Channels |
|
| 5 GHz Operating Channels |
|
| Transmit Power Settings Maximum transmit power will vary according to individual country regulations. All values nominal, +/-2 dBm |
|
| Typical Receiver Sensitivity |
|
| Delay Spread |
|
| Operating Systems Supported |
|
| Security |
|
| Compliance |
|
| Certifications | 
 Cisco Compatible Extensions (Version 4) |
| Warranty | Limited Lifetime |
All specifications are subject to change without notice |
|
The SDC-SSD40NBT is certified for compliance to various CE, ETSI, FCC, Industry Canada, and Wi-Fi Alliance standards with certification to Cisco Compatible Extensions (CCX) specifications planned for the near term. The grants, approvals, and formal test reports associated with these certifications may be leveraged by Laird Technologies customers to achieve their required device certifications. The degree to which customers can leverage these Summit brand items is dependent upon the regulatory agency, industry body, and the type of end device.
If any additional information or guidance is required, please contact the Summit brand certifications group via email or by telephone at 330.434.7929.
CE / ETSI
The SDC-SSD40NBT has been tested for compliance to various CE and ETSI standards and specifications:
- EN 300 328 (Wi-Fi)
- EN 300 328 v1.7.1 (BT 2.1)
- EN 301 489-1
- EN 301 489-17
- EN 301 893
- EN 60950-1
This testing was conducted with the following antennas:
These formal test reports may be leveraged by mobile and portable device vendors as part of their self declaration to obtain the CE mark required by members of the European Union. ETSI/CE rules differ from those of the FCC and IC in that there is no provision for a modular approval. All approvals and certifications must exist at the device level rather than the module (radio) level.
The SDC-SSD40NBT is fully compliant with Annex IV procedures in article 10.5 of R&TTE directive 99/5/EC.
Like all Summit brand devices, the SDC-SSD40NBT is fully compliant with European Union Directive 2003/95/EC or Reduction of Hazardous Substances (RoHS) as per our Declaration of Compliance.
In addition, Summit has secured a compliance certification in accordance with EU Registration, Evaluation, Authorization of Chemicals (REACH).
FCC
Summit has received the following FCC grants for the SDC-SSD40NBT (FCC identifier TWG-SDCSSD40NBT):
FCC Part 15.247 Subpart C
This grant relates to operation in the 2.412 to 2.462 GHz (ISM) and 5.745 to 5.805 GHz (UNII-3) frequency bands.
FCC Part 15.407 Subpart E
This grant relates to operation in the 5.180 to 5.240 GHz (UNII-1), 5.280 to 5.320 GHz (UNII-2), and 5.500 to 5.700 GHz (UNII-2 Extended) frequency bands.
These grants were secured using the following antennas:
The above grants are Modular Approvals. Specific limitations are indicated on each grant.
When using this grant, the SDC-SSD40NBT must be installed only in mobile devices (devices which typically operate at distances greater than 20cm, or 7.9 inches, from the human body). When certifying portable devices (those that typically operate at distances less than 20cm from the human body) a new grant must be secured by the device vendor.
Note: Summit test data may be leveraged by the device vendor to minimize the cost and time associated with the certification process.
Industry Canada
The SDC-SSD40NBT will be certified to the Industry Canada (IC) RSS-210 standard. IC 661A-SDCSSD40NBTcertification is based on FCC certification testing, using the same antennas and transmit power and covering the same frequency bands. Test reports and data sheets relevant to this certification will be available by the beginning of February 2012.
Australian/New Zealand Standard (AS/NZS)
The SDC-SSD40NBT is certified to the following Australian/New Zealand standard:
- AS/NZS 4268:2008 +A1:2010 (RLAN device)
- AS/NZS 4268:2008 +A1:2010 (BT device)
Wi-Fi Alliance
Summit has received an Embedded Client Certification to the following standards: 802.11a, 802.11b, 802.11g, 802.11n, WPA (both personal and enterprise) and WPA2/802.11i (both personal and enterprise). For those host devices which include the SDC-SSD40NBT, the vendor may assert that their device incorporates a Wi-Fi Certified Embedded Client. The vendor need not be a member of the Wi-Fi Alliance to make this assertion but may not use the "Wi-Fi Certified" logo in conjunction with their device unless they themselves are a Wi-Fi Alliance member.
If the device vendor is a member of the Wi-Fi Alliance, they may have WFA certification transferred to them only if they integrate the already-certified module into their device in a "hands off" manner; in other words, make no changes during integration that would impact the way in which the module operates. Laird Technologies will provide consultative services to those vendors who choose to pursue a Wi-Fi Alliance certification for their Summit-equipped devices.
Cisco Compatible Extensions
Summit is a member of the Cisco Compatible Extensions (CCX) program and has a direct license from Cisco for intellectual property relating to the various versions of the CCX specifications. Summit has submitted the SDC-SSD40NBT to an authorized CCX test lab and has been found to be fully compliant with version 4 of the CCX specifications for application specific devices (ASDs). For those host devices which include the SDC-SSD40NBT, the vendor may assert that their device incorporates a Cisco Compatible radio module.
Device vendors who are members of the CCX program may also choose to secure CCX compliance for their end device. When incorporating the SDC-SSD40NBT into their product with the above software version, the vendor need not be a direct licensee for Cisco intellectual property. Rather, in this case the device vendor need only submit their SDC-SSD40NBT enabled device for CCX compliance testing to the version 4 test plan for ASDs. By leveraging Summit's "pre-approved" software and by testing to the same plan, the vendor has a greater assurance that their actual testing will result in end device compliance. Laird Technologies will provide consultative services to those vendors who choose to pursue CCX compliance for their Summit brand equipped devices.
Warranty Statement
Laird Technologies warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to the conditions and limitations set forth below, Laird Technologies will, at its option, either repair or replace any part of its products that prove defective by reason of improper workmanship or materials. Repaired parts or replacement products will be provided by Laird Technologies on an exchange basis, and will be either new or refurbished to be functionally equivalent to new. If Laird Technologies is unable to repair or replace the product, it will refund the current value of the product at the time the warranty claim is made.
This limited warranty does not cover any damage to this product that results from improper installation, accident, abuse, misuse, natural disaster, insufficient or excessive electrical supply, abnormal mechanical or environmental conditions, or any unauthorized disassembly, repair, or modification. This limited warranty also does not apply to any product on which the original identification information has been altered, obliterated or removed, has not been handled or packaged correctly, has been sold as second-hand or has been resold.
This limited warranty covers only repair, replacement or refund for defective Laird Technologies products, as provided above. Laird Technologies is not liable for, and does not cover under warranty, any loss of data or any costs associated with determining the source of system problems or removing, servicing or installing Laird Technologies products. This warranty excludes 3rd party software, connected equipment or stored data. In the event of a claim, Laird Technologies' sole obligation shall be replacement of the hardware.
Duration
This limited warranty applies only to the original end user customer of the product. This limited warranty is non-transferable. This limited warranty is in force for the useful lifetime of the original end product into which the Laird Technologies product is installed. Useful lifetime of the original end product may vary but is not to exceed five (5) years from the original date of the end product purchase. Any repair, component replacement or modification to the original product constitutes the end of the lifetime of the end product as defined here.
Eligibility
Warranty on Laird Technologies products are only applicable if the parts were purchased from Laird Technologies authorized OEMs/distributors/resellers or directly from Laird Technologies.
Limitations
The following parts are not covered by this warranty:
- Products without the label containing Laird Technologies' serial number or MAC address
- Products that are purchased from other end users
- Products that Laird Technologies determines were not purchased through Laird Technologies authorized OEMs/distributors/resellers or directly from Laird Technologies
- All EOL claims to return back to point of purchase or respective distributors.
Disclaimer
The foregoing is the complete warranty for Laird Technologies products and supersedes all other warranties and representations, whether oral or written. Except as expressly set forth above, no other warranties are made with respect to Laird Technologies products and Laird Technologies expressly disclaims all warranties not stated herein, including, to the extent permitted by applicable law, any warranty that may exist under national, state, provincial or local law including but not limited to any implied warranty of non-infringement, merchantability or fitness for a particular purpose. All warranties, whether express or implied, are limited to the periods of time set forth above.
Laird Technologies products are not authorized for use as critical components in life support equipment or for applications in which the failure or malfunction of the products would create a situation in which personal injury or death is likely to occur. Laird Technologies shall not be liable for the death of any person or any loss, injury or damage to persons or property by use of Laird Technologies products.
Laird Technologies' total liability under this or any other warranty, express or implied, is limited to repair, replacement or refund. Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or any other legal theory. To the fullest extent permitted by applicable law, Laird Technologies shall not be liable to the purchaser or end user customer of a Laird Technologies product for any damages, expenses, lost data, lost revenues, lost savings, lost profits, or any other incidental or consequential damages arising from the purchase, use or inability to use the Laird Technologies product, even if Laird Technologies has been advised of the possibility of such damages.
Americas |
| +1-800-492-2320 |
| WirelessInfo@lairdtech.com |
|
|
Europe |
| +44-1628-858-940 |
| WirelessInfo@lairdtech.com |
|
|
Hong Kong |
| +852-2923-0610 (Sales) +852-2923-0609 (Support) |
| WirelessInfo@lairdtech.com |
|
|